Tanh

Instruo Tanh

£99.00

Analog Waveshaper

Instruo Tanh is a three channel, all analogue, wave shaper from Instruo. It takes an input signal and outputs the hyperbolic tangent function [tanh(x)] for that signal.

In more useful terms, it adds curves to a signal!

Traditionally the circuit is used to shape a triangle wave to a sine but when used with more complex signals it behaves as a single knob limiter.

Specification

The tanh has three independent channels for wave shaping.

Description
For many Max/MSP and/or PD users, the [tanh~] object may be familiar. It is likely a much used secret weapon in many contexts!

Describing what the tanh does to a signal, both mathematically and sonically can be a headache, and not particularly useful. So I will describe some particularly fun use cases to give a bit of context.

Feedback control:

Feedback is fun. But feedback can get unpredictable.
The user can insert tanh in the feedback path and use it to reign in runaway feedback. Whether it’s feedback in a delay loop, a reverb, filter or straight up microphonic
In this context, it functions as a limiter on feedback amplitude.
Instead of fading away to silence, when longer sustain is desired, or running away uncontrollably, a signal can be controlled much more easily with a tanh. There will be a much wider range at which a feedback oscillation will stabilise musically.

Wave shaping:

Running a triangle wave through a tanh will allow for some interesting wave shape control
Fully CCW and the resulting signal will be a slightly attenuated pass through of the original triangle wave. As the level is increased, the corners will soften and the waveform will shape into a sine wave.
When a level has increased the sine will soft clip and eventually settle into a unique peaked waveform.

Limiter/distortion:

tanh reacts very well when the user runs a complex audio signal through one of the channels. Drum voices especially!
The effect is sonically similar to compression but achieved through wave shaping as opposed to gain reduction. Limiting is a more appropriate description but it definitely has its own unique characteristic.
Increasing the level will introduce soft clipping distortion/overdrive.

Specifications
4hp
15 mA +12V/ 10 mA -12V / 27mm deep