Accessories & Courses
Hi End Audio Interface with Aux Input and Headphone Amplifier
The main purpose of the ACL Audio Interface module is to interface modular synthesizer systems with professional audio recording and stage equipment. The combination of studio quality signal path, flexible routing possibilities and a headphone amplifier, capable of driving both high and low impedance headphones with low distortion, makes the connection between these different environments effortless and sonically transparent.The ACL Audio Interface offers balanced to unbalanced and unbalanced to balanced stereo lines with level controls. The stereo signal from the auxiliary input, also with level control, can be optionally routed to and mixed together either with balanced to unbalanced, or unbalanced to balanced line signals, or can be muted. The headphone amplifier can also get its signal from one or the other line after the level control and mixing stage, or can be muted. Since the amplifier is AC coupled only at the input, but not at the output, there is an on-board DC protection circuit included. In case the headphone amplifier is driven into clipping, the protection can also be tripped. The module has a soft start function and one overload indicator for every line.
***Please note, product ships in 2-3 days***
Features– One DC coupled electronically balanced input to unbalanced output stereo line with LEVEL control, can vary from full attenuation to unity voltage gain (0 dB).– One AC coupled unbalanced input to electronically balanced output stereo line with LEVEL control, can vary from full attenuation to voltage gain of two (+6 dB).– One routable AC coupled auxiliary stereo input with mute function and LEVEL control, can vary from full attenuation to voltage gain of two (+6 dB).– One routable AC coupled stereo headphone amplifier with VOLUME control, can vary from full attenuation to voltage gain of two (+6 dB).– DC and clipping protection circuit for the headphone amplifier, switches off headphone output if DC at the output exceeds ±50 mV and/or in case of hard clipping.– Two overload indicators – one for every stereo line, calibrated to turn on when the audio levels at the outputs exceed 4,5 Vpp
110 mA +12V / 120 mA -12V40 mm Depth14 hp wide